Nitreum report on the autonomous fertilizer complex Reporting year zero: design stage, no plant connected yet

The fertilizer complex, run to the tonne and the gigajoule.

Nitreum is the autonomous operations layer for fertilizer and nitrogen-products plants. Plant-edge agents hold the ammonia loop, urea and nitrate evaporation, granulation, coating, NPK blending and bagging to spec, rehearse every move on a twin of the whole complex, and stay inside limits your process-safety team sets.

From natural gas to a bagged granule

A nitrogen complex is one long chain. Drift at the reformer shows up as energy at the loop, as concentration at the evaporator and as dust and caking at the granulator. Nitreum puts an agent on each link and one twin over the whole chain, so a move upstream is checked against what it does downstream.

Synthesis-loop diagram of a nitrogen fertilizer complex Natural gas and steam enter the reformer, which sends syngas to the ammonia synthesis loop, with recycle and purge. Ammonia goes to urea and nitrate reaction and evaporation, which also receives carbon dioxide from reforming. The melt goes to granulation or prilling, then coating and conditioning, then NPK blending and bagging, then dispatch. Synthex owns reforming, the loop and evaporation; Granulex owns granulation and coating; Blendex owns blending, bagging and handling. Granvis sensing points sit on the ammonia, melt, granule and blend streams. Nitrotwin simulates the whole complex. unconverted gas recycled, inerts purged CO₂ from reforming to urea synthesis recycle syngas NH₃ melt granules coated blend Reformer natural gas, steam, air in Synthex Ammonia loop high-pressure synthesis Synthex, safety-gated Urea and AN reaction, evaporation Synthex Granulation or prilling, drying Granulex Coating cooling, anti-caking Granulex NPK blending ratio, segregation Blendex Bagging, loading weight, robotic handling Blendex Dotted frame: Nitrotwin, the whole complex simulated before the run Granvis sensing point product stream recycle and side streams
Figure 1. A urea and nitrate complex as Nitreum sees it. Unit names are generic; phosphate and potash granulation lines join at the granulator.
  1. Reform and synthesize

    Reformer temperature and loop conversion held at target per unit of energy. Purge and trip settings are read, never written.

    Synthex: Reform-and-Synthesize
  2. React and evaporate

    Urea or nitrate melt held at the granulation concentration from the online analyzer, not the next lab assay.

    Synthex: React-and-Evaporate
  3. Granulate and condition

    Recycle ratio, spray and bed temperature tuned from live size distribution and moisture; coating set to caking risk.

    Granulex: Granulate-and-Prill, Coat-and-Condition
  4. Blend, bag and ship

    NPK ratio held from nutrient sensing, segregation checked on the belt, bag weight held to target.

    Blendex: Blend-and-Bag, Robot-and-Handling

The process-safety envelope is not a variable

Ammonia is safety-critical, so Nitreum works inside three nested boundaries. Trip settings and safety-instrumented systems belong to your process-safety program and are only ever read. The approved envelope is where agents may move. Inside it sits the target the optimizer chases.

Ammonia-loop operating envelope with a contested purge-rate move Purge rate on the horizontal axis and inerts in the loop on the vertical axis. An outer band marks trip settings, read only. A dashed rectangle marks the approved envelope. An inner green area marks the lowest-energy target. The loop sits in the target. A request to cut purge by 8 percent would push inerts to the envelope edge and is held for approval. The approved smaller step stays inside the envelope. Trip settings and SIS read and logged, never written Approved envelope bounded moves, after the agreed gates Target lowest energy per tonne purge rate, higher to the right inerts in the loop, higher upward loop now requested: purge −8% held for approval approved: smaller step
Figure 2. Illustrative and not to scale. Axes are qualitative; your envelope comes from your own process-safety review.

Minutes of one contested move

Illustrative scenario on one urea campaign. Durations are scenario values, not measurements.

  1. 0.2 s

    Yield-and-Takt asks for purge −8%

    Less hydrogen lost, lower energy per tonne for the campaign.

  2. 0.2 s

    Reform-and-Synthesize holds the purge

    That purge rate keeps inerts inside the envelope the process-safety review approved.

  3. 0.4 s

    The orchestrator rules for safety

    Process safety outranks energy under every run goal. The losing request is logged with its score and reason, and a smaller step goes to a named approver.

  4. 2 m 14 s

    Two people sign

    The shift process engineer and the process-safety approver accept the smaller step, with the safety-instrumented envelope untouched and a tighter review interval.

  5. 95 s

    Energy is recovered elsewhere

    Yield-and-Takt shifts dryer duty and the changeover window instead. Takt is met without touching the loop envelope.

Who signs what, by autonomy stage. The stage is set per loop and can be stepped back at any time.
StageThe agentThe personStarts
ShadowPredicts conversion, concentration, granule quality, energy and emissions; writes nothingRuns the plant as today and comparesFirst phase with every design partner
AssistRecommends bounded moves with the evidenceA process engineer approves or rejects each oneOnce accuracy is proven against the baseline
BoundedWrites low-risk granulation, conditioning and blending setpoints inside documented limitsApproves anything beyond them, and every ammonia-loop move outside the envelopeAfter the safety and ROI gates agreed up front
ExceptionsEscalates safety-adjacent moves and release decisionsAlways decidesPermanent

Energy and emissions, reported per tonne

Energy is the dominant cost of nitrogen fertilizer, and emissions are measured sparsely and reported late. Nitreum reports both continuously, against the boundaries your sustainability team already uses, and never optimizes against a permit limit.

Table 1. Indicators a design-partner unit reports, with their boundary, source and owning product.
IndicatorUnitBoundarySourceOwnerYear-zero baseline
Energy
Energy intensity, ammoniaGJ/t NH3Reformer and synthesis loopHistorian, energy metersSynthex5
Energy intensity, ureaGJ/t ureaUrea synthesis, evaporationHistorian, energy metersSynthex5
Conversion loss and catalyst duty% of designAmmonia loopLoop telemetry, assaysSynthex5
Emissions
Carbon dioxidet CO2/t productComplexEmissions sensors, permit recordsGranvis5
Nitrogen oxidesagainst permitStacks under permitEmissions sensorsGranvis5
Ammonia slipagainst permitStacks under permitEmissions sensorsGranvis5
Nitrous oxideN2O, against permitNitrate units, where presentYour existing analyzerRead only6
Product
Off-spec and recyclet/dComplexMES, quality recordsNitrotwin5
Granule size distribution variance% in bandOne granulatorGranule vision, QC recordsGranulex5

Reporting principles

Your meters, your boundary. Every number comes from the plant's own historian, analyzers, energy meters and emissions sensors.

Limits are read, not traded. Permit limits are verified and logged. Excursions are predicted ahead; the limit itself is never an optimization target.

Every row is cited. Each recommendation carries the spec, procedure or permit it relied on, written to an append-only audit log the plant keeps.

How each indicator is improved

  1. 5Recorded in shadow mode before any write, then reported against that baseline for the rest of the pilot. No result is claimed before a pilot measures it.
  2. 6Nitrous oxide is not a controlled loop in the first release. Where a nitrate unit already measures it, Nitreum reads and reports it alongside the other permit indicators.

A plant that runs all year for a market that buys in seasons

Farmers apply fertilizer in short windows; the complex runs continuously. Grades change, stock builds, and product sits in storage through heat and humidity. Nitrotwin rehearses each grade changeover before it happens, and the conditioning agent coats for the storage season ahead.

Illustrative production calendar for a granulation line Twelve months across. The top lane shows granulation campaigns: urea from January to March, a changeover, NPK from April to July, a changeover, ammonium nitrate from August to October, a changeover, and urea again in November and December. The lower lane shows caking risk in storage rising in the warm summer months, and stock building ahead of the spring and autumn application seasons. JanFebMarAprMayJunJulAugSepOctNovDec Granulation campaigns Urea 46-0-0 NPK blend grade Ammonium nitrate Urea changeover, rehearsed on the twin Storage and stock caking risk in storage stock built ahead of spring and autumn
Figure 3. Illustrative calendar for one granulation line in a northern-hemisphere market. Grades, timing and curve shapes are examples, not a customer plan.

Changeovers rehearsed first

A grade change is usually gambled live. Nitrotwin simulates the ammonia loop, evaporation, granulation and blending together, sequences the changeover and shows the off-spec tonnes it expects before the plant commits.

Coated for the months in storage

Coat-and-Condition holds dryer and cooler outlet temperature and moisture in the storage window and sets the anti-caking coating rate to the predicted caking risk for the product and the season.

Takt held through the peak

Yield-and-Takt balances the line as dispatch climbs, and Blendex keeps blend ratio, bag weight and robotic loading on spec when the trucks queue.

Five products, one closed loop

Each product can land on one unit by itself. Together they share one plant-edge runtime, one set of DCS, analyzer and MES connectors, and one perception layer that every control agent reads.

Table 2. The product line, what each one runs and where it sits in the chain.
ProductWhat it runsAgentsPlace in the chain
Ammonia, urea and nitrate synthesis at exact conversion and energy. Reform-and-Synthesize, React-and-Evaporate Front end; hands a specified melt to Granulex
Granulation, prilling and anti-caking to exact granule spec. Granulate-and-Prill, Coat-and-Condition Takes the melt; feeds Blendex
Every granule, nutrient and emission fault, seen before it becomes off-spec. Defect-and-Inspect, Quality-and-Nutrient Shared perception for every control agent
NPK blending, bagging and robotic handling to exact nutrient ratio. Blend-and-Bag, Robot-and-Handling Closes the loop from granule to loaded truck
Nutrient spec, granule quality, energy, emissions and takt, hit before the run. Yield-and-Takt, with the complex twin Simulates and sequences the other four

The Quality-and-Conformance agent arrives with the Complex tier; the Fertilizer-Knowledge agent answers questions and has no write tools. Read every agent's scope.

Schedule of fees

Land on one unit with a measured baseline, then expand by unit, module, site and autonomy stage. Prices are monthly and in US dollars.

Unit

For producers validating the return on one unit

$22,000 per synthesis or granulation unit, per month
  • One unit, one agent module
  • Plant-edge inference node
  • Connectors to the unit's DCS or APC, analyzers and MES
  • Review console, audit log and lot genealogy
Start a pilot

Complex

For complexes adopting the full loop

$140,000 per complex, per month
  • All eleven agents and the orchestrator
  • Nitrotwin, the as-produced complex twin
  • Energy, emissions and recycle optimization
  • Whole-complex lot genealogy
Talk to us

Enterprise

For groups standardizing across sites

Custom land $900k to $12M annual contract value
  • Multi-site plant-edge fleet
  • Custom product, process and emissions models
  • SLAs, on-prem or private cloud
  • Outcome components on energy, emissions and off-spec
Enterprise terms
Terms that apply across the schedule
Annual prepay15 to 20% discount for paying a year ahead
Multi-yearEnterprise agreements with usage ramps tied to throughput
Outcome componentsA share of measured energy, emissions or off-spec improvement on the highest-value workflows
UsagePer-tonne, per-unit or per-action metering above plan limits

Full pricing and plan comparison

Questions from the first review

What complex managers, process engineers and HSE leads ask before a unit goes into shadow mode.

Only at the autonomy stage your plant has set, and only to an explicit allow-list of low-risk loops inside documented limits, through the approved DCS or APC interfaces. Every design partner starts in shadow mode, where Nitreum predicts and writes nothing. Assist mode follows, where a process engineer approves each recommendation. Bounded autonomy on granulation, conditioning and blending loops comes after the safety and ROI gates agreed up front.

Open year one on a single unit.

Pick one synthesis or granulation unit and one number that matters to you. Shadow mode records the baseline before anything is written, so the first page of your report is your own plant, measured.

  1. Choose the metric: energy per tonne, granule distribution and moisture, off-spec and recycle tonnes, or emissions variance.
  2. Shadow mode: Nitreum reads your historian, analyzers and MES and writes nothing.
  3. Assist mode: a process engineer approves each recommendation.
  4. Expand to the next unit only when the number holds.